Hi Ray
Thanks for the reply,and yes I can work from a circuit diagrams.
However I've also noticed amongst the bits and pieces there seems to be bits missing with the rocker(pick-up selectors)switches.
IE there is nothing underneath the switches to connect for switching off and on there may have been little brass plates and tiny springs? but I just can't remember.
So what I've got is a scratch plate with 2 x p/ups still attached neck and middle,so it's logical to assume they'd go to the switches nearest the neck and middle with the bridge p/up wired to the rocker nearest the control knobs.So what I've got is 1 x p/up laying with bits of wire everywhere 2 x control knobs about the size of 50p pieces.1 brass rod that goes through the rocker switches Rosewood neck and a body and original case.
It's really the bits and pieces that's missing I'm worried about.I was hoping someone somewhere maybe had a down side up picture of the scratch plate.
Again many thanks for taking an interest.
Watty Robertson.
P.S I can't even remember what the guitar sounded like but I do remember when playing the guitar it was so easy to hit the p/up selector switches by mistake really cramped your style.