Vox Cambridge 30 Reverb amp

Hints and tips on getting the sound you want.
Includes anything to do with Fender, Burns and other guitars; playing techniques;
also amps, effects units, recording equipment and any other musical accessories.

Vox Cambridge 30 Reverb amp

Postby John Boyd » 15 Jan 2010, 06:29

Greetings again from downunder.
I'm watching a Vox Cambridge 30 reverb amp (with one 10" Celestion speaker) on a web auction site in NZ and wonder if anyone has any experiences to share about this model. I already have an AC30CC2, so am just looking for something a little smaller and lighter to add to my 'arsenal'.
Any contributions warmly welcomed.
Cheers,
JB
John Boyd
 
Posts: 451
Joined: 16 Sep 2009, 18:36
Location: New Zealand

Re: Vox Cambridge 30 Reverb amp

Postby RUSSET » 15 Jan 2010, 09:40

Hi John,
I remember trying one out in a store about ten years ago. It sounded very good for a solid-state amp, but I remember there were quality control issues, at the time, relating to the internal electrics resulting in a few failures after a short time. I would say that the more reliable Vox 'Pathfinder' & 'VT' ranges may be a safer way to go. I have a Pathfinder 15, & it is a superb lightweight practise/home use amp which has great tone & surprisingly loud volume for it's size.

Tony.
RUSSET
 

Re: Vox Cambridge 30 Reverb amp

Postby Bluesnote » 15 Jan 2010, 09:47

I purchased a Vox VT15 yesterday. What an amazing buy for £109. I cant believe the sounds I'm getting out of it, and I've only just scratched the surface so far.
Its just the right size for what I need, I'm well chuffed with it 8-)
Bluesnote
 

Re: Vox Cambridge 30 Reverb amp

Postby Didier » 15 Jan 2010, 09:48

You can read comments here : http://reviews.harmony-central.com/revi ... everb/10/1

Like all budget amps, it can be upgraded by fitting a more efficient speaker :

Image

left speaker is a 10" Celestion Bulldog speaker from a Cambridge 30 (don't be fooled by the colour, it's not an alnico blue !), right speaker is a Celestion G10 Vintage, much more efficient thanks to a much bigger magnet. both speakers have the same chassis, so replacement is possible without any mechnical modifications (the smaller top speaker is a 8" model from a Vox Pathfinder 15 amp).

Didier
P.S. there has been some reliabilty problems in early models because of a defective optocoupler in the vibrato circuits.
User avatar
Didier
 
Posts: 1934
Joined: 15 Sep 2009, 10:57
Location: West suburb of Paris, France

Re: Vox Cambridge 30 Reverb amp

Postby panchodiaz » 15 Jan 2010, 11:05

Hi John,

I have a Cambridge Reverb 30 TR and it´s a very good amplifier in my opinion. It has two Celestion Blue Bulldog speakers (as shown by Didier) and I think they aren´t bad at all. I had a noise problem based in the reverb circuit which was very difficult to resolve bat now it´s Ok. My amp came with the new optocoupler and I fitted the power IC to 56 watts so now it´s a loud amp without changing the tone. It has two channels. The first one is digital and sounds very well in my opinion but the other one with a valve in the preamp sounds superb. I thought to change the speakers for Red Coat Eminence but never did.

Regards,
Pancho
User avatar
panchodiaz
 
Posts: 171
Joined: 16 Sep 2009, 15:58
Location: Sevilla, Spain

Re: Vox Cambridge 30 Reverb amp

Postby JimTidmarsh » 15 Jan 2010, 12:51

I've been using a Vox Cambridge 30 with single speaker (unmodified) for about 9 years now and can report total satisfaction.

You have a choice of a clean sold-state Channel 1 or a valve driven pre-amp on Channel 2 with a gain and mid range boost. I don't know what sounds you want, but my Burns through Channel 1 with the bass turned up gives me THAT Burns era sound. Channel 2 is better with my Strat.

I paid about £220 new for this amp in 2001 and it's been worth every penny.
User avatar
JimTidmarsh
 
Posts: 378
Joined: 21 Sep 2009, 12:21
Location: South Woodham Ferrers, Essex, UK

Re: Vox Cambridge 30 Reverb amp

Postby Didier » 15 Jan 2010, 14:10

panchodiaz wrote:I have a Cambridge Reverb 30 TR and it´s a very good amplifier in my opinion. It has two Celestion Blue Bulldog speakers (as shown by Didier) and I think they aren´t bad at all.

That's the "twin" model, wich is excatly the same as the "single" model, apart for having two 16 ohm speakers (in parallel) instead of one 8 ohm speaker.

I had a noise problem based in the reverb circuit which was very difficult to resolve bat now it´s Ok. My amp came with the new optocoupler and I fitted the power IC to 56 watts so now it´s a loud amp without changing the tone. It has two channels. The first one is digital and sounds very well in my opinion but the other one with a valve in the preamp sounds superb. I thought to change the speakers for Red Coat Eminence but never did.

I have all the documentation about this power IC modification if someone needs it.

Didier
User avatar
Didier
 
Posts: 1934
Joined: 15 Sep 2009, 10:57
Location: West suburb of Paris, France


Return to Guitars and Gear

Who is online

Users browsing this forum: No registered users and 18 guests

Ads by Google
These advertisements are selected and placed by Google to assist with the cost of site maintenance.
ShadowMusic is not responsible for the content of external advertisements.