AC15 Heritage Settings

Anything to do with Fender, Burns and other guitars; also amps, effects units including eTap, plus any other music making accessories

Moderators: David Martin, dave robinson, Iain Purdon, George Geddes

AC15 Heritage Settings

Postby keithmantle » Wed Dec 30, 2009 5:59 pm

Hi Dave,Sometime back you put some settings for this amp on the site, I can't find it, but do remember you mentioned the top/cut switch, does this switch work on both channel 1 and 2, regards Keith (I am looking for The Shads early sound)
User avatar
keithmantle
 
Posts: 1466
Joined: Mon Oct 26, 2009 5:26 pm
Location: Codsall South Staffordshire
Full Real Name: keith george mantle

Re: AC15 Heritage Settings

Postby Amanda » Wed Dec 30, 2009 10:25 pm

HI Keith,

Yes the top cut control works on both channels, as in the original
1960's AC15.

I would say for early stuff, EF86 channel, pentode mode, brilliance
switch to number 2 and roll off the top if required using the cut control.

Don't overdrive the EF86 with the echo unit or it will distort due to the
lower clean headroom of the EF86 Channel.

For later Shads stuff it's the top boost channel, but I can't remember
the treble and bass settings, but you will find the treble and bass controls
interact due to the way the tone circuit is arranged (A quirk of the original top boost amps!)

Are you coming next Tuesday Keith?

If so bring it and we'll have a tweak!

I'll bring my Q20 with Charlie's updated patches in.

Regards

Amanda
[Check Out My Meazzi Site: http://www.meazzi.org.uk
And Tape Echo Forum: http://ac15.org.uk/meazzibbs/index.php

You're Never Alone With A Mitzi!
User avatar
Amanda
 
Posts: 967
Joined: Sat Sep 12, 2009 11:55 am
Full Real Name: Amanda Hambidge

Re: AC15 Heritage Settings

Postby Risky » Wed Dec 30, 2009 11:36 pm

Amanda

I'll be there next Tuesday... but I don't need tweaking :lol:

Phil
(ex-guitar player) - now a ukulele and ukulele bass player!
Update: After 10 years absence, now a born-again Hankie
User avatar
Risky
 
Posts: 277
Joined: Tue Sep 15, 2009 7:07 pm
Location: Staffordshire
Full Real Name: Phil Wolstenholme

Re: AC15 Heritage Settings

Postby ecca » Thu Dec 31, 2009 12:00 am

Yes you do.
ecca
 

Re: AC15 Heritage Settings

Postby roger bayliss » Thu Dec 31, 2009 1:03 am

Oh no he dosn't (Panto Time :lol: )

The Top Boost settings are often with the bass cranked fairly high around 4-5 O'clock and the treble around 2 O'clock depending on tune and venue for a lot of stuff... if you use the Magic stomp Keith put it on the lower output on the switch at the back and adjust the output knob between 12 O'clock upwards

The top cut also depends on the tunes and I hover between 0- halfway typically around 1/4 or so depending on PU and tune thats 9 O'Clock looking from the front of the amp.

Hope to be there for the first meeting of 2010 so long as I have gotten over the Swine flu ... sniff :cry:

Happy New Year till then pals :wave:
American Pro Series Strat 2017, G&L S500 Natural Ash
User avatar
roger bayliss
 
Posts: 1815
Joined: Tue Sep 15, 2009 12:15 am
Full Real Name: Roger Bayliss

Re: AC15 Heritage Settings

Postby David Martin » Thu Dec 31, 2009 10:19 am

For ultimate Burns sounds, Bass full up on Top Boost channel, and Treble to where it begins to bit and sound nasal...
David M
User avatar
David Martin
Site Admin
 
Posts: 1868
Joined: Tue Sep 08, 2009 4:48 pm
Location: Lincoln
Full Real Name: David Martin

Re: AC15 Heritage Settings

Postby Amanda » Fri Jan 01, 2010 12:26 pm

Mr Bakewell will also be there on Tuesday!

So will my EFTP Q20 with Charlie's latest updated patches!

As for tweaking - OO-ERR MISSUS!

If you've got swine flu Roger, I hope you wear an isolation suit!
[Check Out My Meazzi Site: http://www.meazzi.org.uk
And Tape Echo Forum: http://ac15.org.uk/meazzibbs/index.php

You're Never Alone With A Mitzi!
User avatar
Amanda
 
Posts: 967
Joined: Sat Sep 12, 2009 11:55 am
Full Real Name: Amanda Hambidge

Re: AC15 Heritage Settings

Postby Risky » Fri Jan 01, 2010 5:08 pm

Amanda wrote:Mr Bakewell will also be there on Tuesday!

So will my EFTP Q20 with Charlie's latest updated patches!

As for tweaking - OO-ERR MISSUS!

If you've got swine flu Roger, I hope you wear an isolation suit!


An appearance from Mr Bakewell AND a chance to use the new EFTP Q20... I can't for Tuesday :D
(ex-guitar player) - now a ukulele and ukulele bass player!
Update: After 10 years absence, now a born-again Hankie
User avatar
Risky
 
Posts: 277
Joined: Tue Sep 15, 2009 7:07 pm
Location: Staffordshire
Full Real Name: Phil Wolstenholme

Re: AC15 Heritage Settings

Postby Amanda » Sat Jan 02, 2010 1:20 pm

You Can't What For Tuesday? :lol:

We'll set the Q20 up on your AC15 then Phil!
[Check Out My Meazzi Site: http://www.meazzi.org.uk
And Tape Echo Forum: http://ac15.org.uk/meazzibbs/index.php

You're Never Alone With A Mitzi!
User avatar
Amanda
 
Posts: 967
Joined: Sat Sep 12, 2009 11:55 am
Full Real Name: Amanda Hambidge

Re: AC15 Heritage Settings

Postby ecca » Sat Jan 02, 2010 5:08 pm

Told you he wanted tweaking.
ecca
 

Next

Return to Gear

Who is online

Users browsing this forum: Google [Bot] and 41 guests

Ads by Google
These advertisements are selected and placed by Google to assist with the cost of site maintenance.
ShadowMusic is not responsible for the content of external advertisements.