Question for the vintage amp gurus.

For anything to do with guitars, amps, effects units and any other music making accessories

Moderators: David Martin, dave robinson, Iain Purdon, George Geddes

Question for the vintage amp gurus.

Postby pjr » Mon Feb 20, 2017 5:52 pm

I've just come across this Selmer 30SS solid state amp amongst the huge amount of gear I have to dispose of for someone.
After a small repair on its preamp board it is working as it should be.
I've never been a fan of solid state guitar amps but to be honest I can't quite believe just how good this thing sounds!
Perhaps some of the sound is due to the different pairing of the 10" speakers that it contains.
I don't ever recall seeing one of these in the old Bell's catalogues that I used to drool over as a spotty teenager and I can't seem to find much about it on the web - although strangely I did manage to find a circuit diagram.
Was this made with these speakers as stock or are they retro fits I wonder?
Any info would be appreciated especially as to the possible monetary value as it will be for sale.

Cheers,

Pete
SSfront.jpg
(670.5 KiB) Downloaded 9826 times
SSrear.jpg
(475.46 KiB) Downloaded 9826 times
pjr
 
Posts: 346
Joined: Tue Sep 15, 2009 10:57 am
Location: Worksop, North Nottinghamshire.
Full Real Name: Peter J Richardson

Re: Question for the vintage amp gurus.

Postby JimN » Tue Feb 21, 2017 2:10 am

You can find a wealth of information on Selmer, Truvoice and Kelly amplifiers as a part of the Vintage Hofner website.

The main URL for the site is http://www.vintagehofner.co.uk,

but there is a direct link to Selmer amplifiers at:

http://www.vintagehofner.co.uk/gallery/gallery3/selm.html

and even more remarkably, one direct to your amplifier model at:

http://www.vintagehofner.co.uk/selmer/black/sel8.html.

Value?

Difficult to say, but really not much.

The solid state amps just don't have the well-deserved reputation of the Zodiac, Thunderbird, Treble'n'Bass, etc. By the time of the SS amps, Selmer had lost the driving force of their main gurus (who left and started the spin-off Kelly all-valve brand)
User avatar
JimN
 
Posts: 4781
Joined: Thu Sep 17, 2009 11:39 pm
Full Real Name: Jim Nugent

Re: Question for the vintage amp gurus.

Postby pjr » Tue Feb 21, 2017 8:27 pm

Thanks for that useful info Jim - there's some really interesting stuff there.
I'm still very curious about the speakers though. I can't see why Selmer would put in 2 speakers from different manafacturers
which makes me think they are probably retro fits.
But as I said previously they do sound bloody good:)


Cheers,

Pete
pjr
 
Posts: 346
Joined: Tue Sep 15, 2009 10:57 am
Location: Worksop, North Nottinghamshire.
Full Real Name: Peter J Richardson

Re: Question for the vintage amp gurus.

Postby RayL » Wed Feb 22, 2017 9:47 am

A good clue for identifying 'retro fits' is to look at the solder joints. Normally a manufacturer will ensure that the joint is strong mechanically as well as electrically. The wire will go through the tag and be looped back, and the solder joint will be smooth and have that patina that tin/lead solder acquires over time.

In this case, having two different speakers is a dead giveaway - one of them is very unlikely to be an original.
User avatar
RayL
 
Posts: 1256
Joined: Wed Sep 16, 2009 4:25 pm
Location: Carshalton, Surrey
Full Real Name: Ray Liffen

Re: Question for the vintage amp gurus.

Postby pjr » Sun Mar 12, 2017 12:40 pm

Thanks Ray. I understand and agree with what you're saying.
Out of interest, I've attached a closer view of the connections which are coincidently both of the screw type not soldered.
Anyway as I said before it works fine,sounds really good and it's up for grabs. The big question is the moneteary value of such a thing.
As Jim said it's nowhere near the value of the valve models.

Cheers,

Pete
Attachments
Connections.jpg
(59.86 KiB) Downloaded 9414 times
pjr
 
Posts: 346
Joined: Tue Sep 15, 2009 10:57 am
Location: Worksop, North Nottinghamshire.
Full Real Name: Peter J Richardson

Re: Question for the vintage amp gurus.

Postby JimN » Sun Mar 12, 2017 2:25 pm

Steve Russell (who runs the Selmer and related websites cited above) might be interested in that amp. He's always on the lookout for Selmer oddballs!

I think you can contact him on steve@vintagehofner.co.uk

Hope this helps.
User avatar
JimN
 
Posts: 4781
Joined: Thu Sep 17, 2009 11:39 pm
Full Real Name: Jim Nugent

Re: Question for the vintage amp gurus.

Postby pjr » Sun Mar 12, 2017 4:40 pm

Thanks Jim


Pete
pjr
 
Posts: 346
Joined: Tue Sep 15, 2009 10:57 am
Location: Worksop, North Nottinghamshire.
Full Real Name: Peter J Richardson

Re: Question for the vintage amp gurus.

Postby cockroach » Mon Mar 13, 2017 3:41 pm

I don't think there's much wrong with many transistor amps- they've been very good since the mid'70's IMHO...

As long as the 'valve amps are superior to tranny amps' snobbery continues, at least the tranny amps will remain more affordable!

On the grounds of light weight, rugged build and reliability alone, they are worth considering...and many tranny amps sound very good indeed and have been used by many professional and respected players..

I've owned and been gigging and recording with tranny amps for about 40 years now..The Yamaha, Roland, Peavey and Marshall solid state jobs which I've used and/or owned in that time are fine by me..
cockroach
 
Posts: 1459
Joined: Sun Sep 20, 2009 11:33 am
Location: Australia
Full Real Name: john cochrane


Return to Gear

Who is online

Users browsing this forum: No registered users and 16 guests

Ads by Google
These advertisements are selected and placed by Google to assist with the cost of site maintenance.
ShadowMusic is not responsible for the content of external advertisements.