Kemper / Pedals

For anything to do with Fender, Burns and other guitars; also amps, effects units inc eTap plus any other music making accessories

Moderators: David Martin, dave robinson, Iain Purdon, George Geddes

Kemper / Pedals

Postby clivea » Wed May 04, 2022 5:37 pm

I read an old thread from 2016 recently ....

Look out Binson, Meazzi, HCSE......Kemper have announced that they are looking at including new software with their Profiling Amps that will allow not only the Cloning of the amp's tone/sound but also any effects unit. This means if you get your hands on the device you like then you could Clone the entire selection of factory presets....and it's all legal....wow!.....software say Kemper was developed in conjunction with Baye Inc Electronics...a major player in Silicon Valley....Isn't Technology Great?.......

Can't remember who posted it, but I would like to know if this is in fact, is possible and if so, how?

There's nothing in the manual explaining this.

Clive
clivea
 
Posts: 91
Joined: Thu May 27, 2010 8:32 am
Location: GRIMSBY UK
Full Real Name: T Clive Aspinall

Re: Kemper / Pedals

Postby roger bayliss » Thu May 05, 2022 12:54 am

Thus explains effect cloning, but seems to be used by some for overdrive type sounds, not so sure this could clone an echo or reverb or modulation effect. Seems to clone the overdrive sound in a similar way that amps might be cloned. That is like an overdiven amp.


https://youtu.be/JgMCAARwdtg
American Pro Series Strat 2017, G&L S500 Natural Ash
User avatar
roger bayliss
 
Posts: 1814
Joined: Tue Sep 15, 2009 12:15 am
Full Real Name: Roger Bayliss

Re: Kemper / Pedals

Postby clivea » Thu May 05, 2022 7:28 am

Hi Roger,
Thanks for the very interesting and informative video.
Certainly shows it can be done eh!

Clive
clivea
 
Posts: 91
Joined: Thu May 27, 2010 8:32 am
Location: GRIMSBY UK
Full Real Name: T Clive Aspinall

Re: Kemper / Pedals

Postby clivea » Thu May 05, 2022 7:31 am

…. do you use a Kemper Roger?
clivea
 
Posts: 91
Joined: Thu May 27, 2010 8:32 am
Location: GRIMSBY UK
Full Real Name: T Clive Aspinall

Re: Kemper / Pedals

Postby roger bayliss » Thu May 05, 2022 10:08 am

No Clive, but have looked into it and understand how it works fairly well. Bit pricey for me to justify. They are snapshots of amps operating under certain settings , so if you profile an AC30 , you get a profile of the amp under one set of conditions. I do not thing you could then use that profile , changing tone controls on the Kempler and getting a match to the AC30 control settings. Best you could do us likely a setting to suit a particular tune and profile that. So you would need a profile patch for individual tunes.

Bit like IR speaker responses, where a mic placement on a certain speaker can be imitated, but need several IR's to cover the different mic positions , rather than one IR that you can adjust. Interesting tech though.

AXE FX is another similar concept.
American Pro Series Strat 2017, G&L S500 Natural Ash
User avatar
roger bayliss
 
Posts: 1814
Joined: Tue Sep 15, 2009 12:15 am
Full Real Name: Roger Bayliss


Return to Gear

Who is online

Users browsing this forum: No registered users and 33 guests

Ads by Google
These advertisements are selected and placed by Google to assist with the cost of site maintenance.
ShadowMusic is not responsible for the content of external advertisements.