Anything to do with Fender, Burns and other guitars; also amps, effects units including eTap, plus any other music making accessories
Moderators: David Martin, Iain Purdon, dave robinson, George Geddes
by vonduck » 10 Aug 2011, 11:08
Hi folks,
I have recently acquired a Vox AD60VT amp Valvetronix and have also purchased a Magicstomp unit... my question is for those who own one of these amps is "what settings on the amp should i use as to the dials etc, so that the Magic stomp does not conflict with it using its settings" if that makes sense! My thinking is that the amp should be "clean" as it were and the Magicstomp takes care of the echo stuff?
There are so many dials and whistles on this amp that i thought i would ask so i don't get frustrated initially!
Appreciate any help form you learned folk out there in the Northern hemisphere!
Regards
Doug
-
vonduck
-
by keithmantle » 10 Aug 2011, 14:56
Hi Doug, One of our 'Hankies' Ian Plant AKA stratpicker/sixchannel i think uses a VT60, look up his name in members and send him a pm, just in case he doesn't see the thread (he gets a great sound from his)
-
keithmantle
-
- Posts: 1465
- Joined: 26 Oct 2009, 17:26
- Location: Codsall South Staffordshire
by Mark Burton » 10 Aug 2011, 16:59
Doug
Use the AC15TB setting, no modulation, maybe a little compression, no delay or reverb keep the gain at 10 O'clock or below (when looking from front) set tone until your ears tell you it's right - should be plain sailing !
good luck
Mark
Mark Burton
-
Mark Burton
-
- Posts: 370
- Joined: 17 Sep 2009, 10:18
by vonduck » 10 Aug 2011, 17:30
Thanks guys... as always -Awesome on this site!
Kia ora
Doug
-
vonduck
-
Return to Gear
Who is online
Users browsing this forum: Majestic-12 [Bot] and 53 guests