Any topic not covered in one of the specialist forums below
Moderators: David Martin, dave robinson, Iain Purdon, George Geddes
by Jay Bass » Sun Nov 17, 2019 4:26 pm
Hi has anyone used a seperate rackmount feedback destroyer integrated into thier pa system
im looking for some advice as to where this would go in the chain
i am using a behringer xair18 digital mixer , into a active crossover, then into the power amps
i would pressume the feedback destroyer would be connected to the mixer outs then into the crossover
thanks
regards
jay
-
Jay Bass
-
- Posts: 953
- Joined: Wed Sep 16, 2009 6:10 pm
- Location: Cambridgeshire UK
- Full Real Name: Jay Van Harte
by RayL » Mon Nov 18, 2019 8:57 am
Jay,
Yes, after the mixer.
If you haven't bought one already, I've got a FBQ2496 that I was thinking of selling. Full working order, manuals, original box.
Ray
-
RayL
-
- Posts: 1261
- Joined: Wed Sep 16, 2009 4:25 pm
- Location: Carshalton, Surrey
- Full Real Name: Ray Liffen
by Admin » Mon Nov 18, 2019 12:43 pm
If you’re going to use one of these things here are some tips on how to get the best results:
Let it set 7 or 8 filters as a maximum.
If it sets any filter to narrower than 1/10 octave widen it.
If it sets any filter deeper than 6dB reduce the depth.
Lock all filters before any music goes through them.
Bob
-
Admin
- Site Admin
-
- Posts: 556
- Joined: Tue Sep 08, 2009 1:02 pm
- Full Real Name: Site Admin
by Jay Bass » Mon Nov 18, 2019 7:20 pm
Thanks for the comfirmation of placement
i already have the unit , i used it some time ago in a different set up
without crossovers so was unsure of the correct placement
thanks for the tips Bob
Regards
jay
-
Jay Bass
-
- Posts: 953
- Joined: Wed Sep 16, 2009 6:10 pm
- Location: Cambridgeshire UK
- Full Real Name: Jay Van Harte
Return to The Lounge
Who is online
Users browsing this forum: No registered users and 30 guests