Rotary Switch

Anything to do with eTap2HW

Moderators: David Martin, dave robinson, Iain Purdon, George Geddes

Rotary Switch

Postby zmark » Sun Mar 27, 2016 11:56 am

Hi All,
Sorry my first post is a question.
Just built the etap2hw kit from Newtone.
Wired the switch as per instructions (checked it three times!)
I have it set so position 0 is fully anticlockwise then set the tag so it rotates clockwise 7 steps.
According to the list, position 7 should be tremolo mine is 6 and 7 is a really fast multi tap.
Not sure if the others are correct but don't know how to tell, as it's my first.
What am I missing here?

Regards
Mark
zmark
 
Posts: 4
Joined: Mon Mar 14, 2016 8:25 am
Location: Lincoln
Full Real Name: Mark Denton

Re: Rotary Switch

Postby Echotapper » Sun Mar 27, 2016 5:35 pm

Hi Mark,

The BCD switch you probably have is with the first program on the last location. This is due to the differt BCD rotary switches on the market. The 0 position needs to be in the order of 000,001,010,011.......in your case it start with 001 and ends with 000.


http://www.echotapper.nl/wp/?p=586

Hope this helps,

Piet
Echotapper
 

Re: Rotary Switch

Postby ecca » Sun Mar 27, 2016 5:55 pm

As Piet says, some switches are 0-7 and some are 1-8.
Not a lot you can do about it.
ecca
 

Re: Rotary Switch

Postby zmark » Mon Mar 28, 2016 11:12 am

Thanks Piet and ecca.
That makes sense now!
zmark
 
Posts: 4
Joined: Mon Mar 14, 2016 8:25 am
Location: Lincoln
Full Real Name: Mark Denton


Return to eTap2HW Forum

Who is online

Users browsing this forum: No registered users and 12 guests

Ads by Google
These advertisements are selected and placed by Google to assist with the cost of site maintenance.
ShadowMusic is not responsible for the content of external advertisements.