Any topic not covered in one of the specialist forums below
Moderators: David Martin, Iain Purdon, dave robinson, George Geddes
by Jay Bass » 17 Nov 2019, 16:26
Hi has anyone used a seperate rackmount feedback destroyer integrated into thier pa system
im looking for some advice as to where this would go in the chain
i am using a behringer xair18 digital mixer , into a active crossover, then into the power amps
i would pressume the feedback destroyer would be connected to the mixer outs then into the crossover
thanks
regards
jay
-
Jay Bass
-
- Posts: 951
- Joined: 16 Sep 2009, 18:10
- Location: Cambridgeshire UK
- Full Real Name: Jay Van Harte
by RayL » 18 Nov 2019, 08:57
Jay,
Yes, after the mixer.
If you haven't bought one already, I've got a FBQ2496 that I was thinking of selling. Full working order, manuals, original box.
Ray
-
RayL
-
- Posts: 1262
- Joined: 16 Sep 2009, 16:25
- Location: Carshalton, Surrey
- Full Real Name: Ray Liffen
by Admin » 18 Nov 2019, 12:43
If you’re going to use one of these things here are some tips on how to get the best results:
Let it set 7 or 8 filters as a maximum.
If it sets any filter to narrower than 1/10 octave widen it.
If it sets any filter deeper than 6dB reduce the depth.
Lock all filters before any music goes through them.
Bob
-
Admin
- Site Admin
-
- Posts: 557
- Joined: 08 Sep 2009, 13:02
- Full Real Name: Site Admin
by Jay Bass » 18 Nov 2019, 19:20
Thanks for the comfirmation of placement
i already have the unit , i used it some time ago in a different set up
without crossovers so was unsure of the correct placement
thanks for the tips Bob
Regards
jay
-
Jay Bass
-
- Posts: 951
- Joined: 16 Sep 2009, 18:10
- Location: Cambridgeshire UK
- Full Real Name: Jay Van Harte
Return to The Lounge
Who is online
Users browsing this forum: No registered users and 21 guests