Anything to do with Fender, Burns and other guitars; also amps, effects units including eTap, plus any other music making accessories
Moderators: David Martin, dave robinson, Iain Purdon, George Geddes
by Somerset » Wed Jul 05, 2023 1:50 pm
I’ve had a Vox AC15C1X for several months but not spent much time playing with the tone controls until today. And I’ve noticed something very strange on the TOP BOOST channel and am curious to know if this is common across other Vox models.
What I discovered is that with the TREBLE full on and the TONE CUT below the 3 o’clock position there is no noticeable change in the BASS above the 10 o’clock position. This results in a very bright tone with almost no bass. The BASS control does not become active until the TREBLE is set below about the 3 o’clock position or the TONE CUT increased.
Last edited by
Somerset on Thu Jul 06, 2023 3:43 pm, edited 1 time in total.
-
Somerset
-
- Posts: 39
- Joined: Mon May 09, 2022 10:18 am
- Location: North Somerset
- Full Real Name: Strymon Volante User
by fenderplucker » Thu Jul 06, 2023 3:52 am
The bass and treble controls in the Vox top boost channel do indeed interact in a non-intuitive way. This is shown in the emulation available at
http://www.duncanamps.com/tsc/index.html. While this does not include the effect of the tone cut control, you can imagine how a simple additional treble roll off will modify the response curves.
Paul.
-
fenderplucker
-
- Posts: 275
- Joined: Wed Sep 16, 2009 1:51 pm
- Full Real Name: Paul Rossiter
by Somerset » Thu Jul 06, 2023 3:43 pm
Thank you for your comments Paul and Gary.
The youtube video I found very interesting but sadly I don't think I can use the Duncan's Amps tone stack tool because I use a 64bit iMac and that does not seem to be a supported operating system.
-
Somerset
-
- Posts: 39
- Joined: Mon May 09, 2022 10:18 am
- Location: North Somerset
- Full Real Name: Strymon Volante User
Return to Gear
Who is online
Users browsing this forum: No registered users and 66 guests