HELP!!!! eTap2hw valve automatic.....

[Strummer]

Hi all,

I have a problem, received from ecca (he's on holiday for three weeks!) my brand spanking new echo unit, plugged in the Input to the Guitar, plugged in the Output to the amp and...........nothing???? Played around for about an hour, and, in the heat, finally gave up exasperated and my childish excitement (first time in years) totally spent and destroyed!

Can anyone help me with this problem. I use an AC30 CC2 valve (ex Shadows reserve amp from VOX factory which works with Alesis Quadraverb GT2) but not with the new eccamatic eTap2hm valve?

I am screaming inside Grrrrrrrrrrrrrrrr!

[dave robinson]

Have you got the polarity right on the little connector to the power supply ? If it's the wrong way round it will light up but it won't work.

[keithmantle]

HI Arthur, make sure your transformer is AC-AC 12 v I'm sure Ecca told me the polarity doesn't matter with this type of transformer (or i might have been dreaming !!) the first dial input level is also the on/off switch !

[GuitarPhil]

It definitely MUST be an AC supply (polarity not relevant). It won't work with the more common DC supplies.

[dave robinson]

It definitely MUST be an AC supply (polarity not relevant). It won't work with the more common DC supplies.

It is relevent. Mine only works one way, although it lights up either way. It's the dual valve jobbie.

[GuitarPhil]

Since AC doesn't have a polarity (it's ALTERNATING) then, with respect, by definition polarity IS irrelevant.

[Strummer]

Gentlemen, one and all...I tried reversing the the connector
on the power lead that goes in to the echo box...result: NOTHING?

So, I felt like throwing it out of the window (perhaps the hot sticky weather also had something to do with that?)

However, although, it all lights up, no echoes are forthcoming, and that was plugging it into my AC30 CC2?

Any suggestions guys?

[dave robinson]

My apologies to Phil, I just tried reversing the plug on the PSU and it does work. I must have been thinking of another piece of kit - sorry.
Arthur have you got the leads from echo to amp / guitar the right way round, I know it sounds obvious but I've done it myself. Also make sure the volume is cranked up, have you tested the leads individually into the amp and got a signal ?
Other than that you need to speak to Ecca.

[Twang46]

Arthur

You have switched the echotap "on" .............. as far as I remember there is a on/off switch on these that may be built into the vol control or may indeed be separate.

I know, I know but it just might be the answer (we have all been there at sometime) as well as the guitar/output lead in the wrong way round ...

Don't chuck it through the window just yet

Dick.

[Strummer]

Gentlemen/lads,

I have looked at that, but, just as a precaution will go through everything again either tonight, or, tomorrow, got a day off y'see?

Now the one thing that really "bothers" me is this 'on/off' switch, where the hell is that then? If it lights up when the power is going through it I thought that that was switched on? I mean, you can change up or down, switch modes etc, etc?

Hmmm? Can some one illucidate for me please? I'm lost here.

Thanks peeps.

Kind regards

Arthur

The ecca mystery season is upon us Lol! I think its his way of testing us. Lol!