Hints and tips on getting the sound you want. Includes anything to do with Fender, Burns and other guitars; playing techniques; also amps, effects units, recording equipment and any other musical accessories.
Moderators: David Martin, Iain Purdon, dave robinson, JimN, George Geddes
by roger bayliss » 11 Aug 2016, 17:01
Not had them myself but looking at the DC resistance they look like they will be fine for Shadows sounds. Not to different in DC resistance to the CS54's by Fender. They look like they have heavy chamfering on pole pieces which is similar to the CS57/62's by Fender. Alnico V as well. Lots of buyers seem positive about them !
Sod it I bought some at that price !
American Pro Series Strat 2017, G&L S500 Natural Ash
-
roger bayliss
-
- Posts: 1787
- Joined: 15 Sep 2009, 00:15
by Uncle Fiesta » 13 Aug 2016, 01:32
Can't comment specifically on these pickups, but have bought other parts fromm that supplier and they worked fine. Reading the spec, I expect the pickups to sound just right in a Strat; the overwound bridge pickup will prevent the 'ice-pickiness' one sometimes gets.
My experience with Ironstone pickups, I have to say, was less happy.
-
Uncle Fiesta
-
- Posts: 1166
- Joined: 27 Apr 2012, 23:31
- Location: near Gainsborough, England
by roger bayliss » 17 Aug 2016, 14:45
These arrived yesterday and were well wrapped and delivered quickly. I have not installed them yet. I checked the DC resistance and the Neck was a bit more than 56K and the middle about 58K. The bridge was a little over 6.1 K. They seem well made and have chamfered poles reminiscent of the CS 57/62's.
They also sell a hotter set of 60's PU's around 6.1k Neck/Middle and 6.8k bridge for info. Same price. Look in sellers shop.
On the subject of Ironstone PU's they are quite good as I have heard others using them for Shadows sounds.
American Pro Series Strat 2017, G&L S500 Natural Ash
-
roger bayliss
-
- Posts: 1787
- Joined: 15 Sep 2009, 00:15
by kipper » 18 Aug 2016, 10:51
roger bayliss wrote:These arrived yesterday and were well wrapped and delivered quickly. I have not installed them yet. I checked the DC resistance and the Neck was a bit more than 56K and the middle about 58K. The bridge was a little over 6.1 K. They seem well made and have chamfered poles reminiscent of the CS 57/62's.
They also sell a hotter set of 60's PU's around 6.1k Neck/Middle and 6.8k bridge for info. Same price. Look in sellers shop.
On the subject of Ironstone PU's they are quite good as I have heard others using them for Shadows sounds.
look forward to hearing what you think of them as I was looking as well. thanks peter
-
kipper
-
- Posts: 892
- Joined: 17 Sep 2009, 07:39
- Location: Pembrokeshire wales
by chaddman » 21 Aug 2016, 17:18
Hi all,I purchased a set of 59 VINTAGE ALNICO V in White this week to put in my MIM modern player strat but ended up fitting them in my AMERICAN SPECIAL strat. They are great and IMHO sound better than the TEXAS SPECIALS I took out.Hope this is helpful. Cheers Phil.
-
chaddman
-
- Posts: 67
- Joined: 11 Apr 2015, 19:00
by kipper » 07 Sep 2016, 18:10
did anyone else use these pickups what did you think. thanks peter
-
kipper
-
- Posts: 892
- Joined: 17 Sep 2009, 07:39
- Location: Pembrokeshire wales
Return to Guitars and Gear
Who is online
Users browsing this forum: No registered users and 9 guests