Anything to do with Fender, Burns and other guitars; also amps, effects units including eTap, plus any other music making accessories
Moderators: David Martin, dave robinson, Iain Purdon, George Geddes
by RogerCook » Sat Mar 04, 2017 1:54 pm
I'm looking for some info on the DeArmond 610 volume/tone pedal.
I know the tone section used a dual gang pot with 250k and 500k tracks on the same spindle. The circuit I have shows these as linear tracks but I've read somewhere on the internet that these were actually log/antilog (can't find it now though). What I need to know is which was which - ie was the 500k track log or antilog and the same for the 250k one.
Any help gratefully received!
Roger
-
RogerCook
-
- Posts: 495
- Joined: Thu Sep 17, 2009 9:56 am
- Full Real Name: Roger Cook
by JimN » Sat Mar 04, 2017 2:01 pm
What circuit diagram do you have, Roger?
I'll tell you now that the dual-gang pot is virtually impossible to replace.
-
JimN
-
- Posts: 4712
- Joined: Thu Sep 17, 2009 11:39 pm
- Full Real Name: Jim Nugent
by RogerCook » Sat Mar 04, 2017 2:13 pm
Thanks Jim.
Essentially the circuit I have is the same as this one but with component values showing the pots as 500k and 250k:
http://www.tdpri.com/threads/dearmond-6 ... lp.530094/My plan is to cannibalise 2 pots to make one correct one (I've already done this with linear tracks) though I think Omeg may be able to produce the correct pot (electronically if not cosmetically) subject to a minimum order of 3.
By the way, this is not for a real DeArmond pedal, but a modified Fender one.
-
RogerCook
-
- Posts: 495
- Joined: Thu Sep 17, 2009 9:56 am
- Full Real Name: Roger Cook
by JimN » Sat Mar 04, 2017 3:31 pm
Roger: How much have you been quoted for three of the dual-ganged pots?
I might like to tag along on that and order another few as spares.
There was a long thread which dealt with this some years ago:
http://www.shadowmusic.co.uk/viewtopic.php?f=21&t=11321&start=120
-
JimN
-
- Posts: 4712
- Joined: Thu Sep 17, 2009 11:39 pm
- Full Real Name: Jim Nugent
by RogerCook » Sat Mar 04, 2017 4:16 pm
£5.95 each + £5 delivery + VAT. I need to be sure about the curves first though. The linear one does work but leaves approx half the track resistance in circuit in the centre position, hence a noticeable volume drop, and less resistance at the extremities of travel than the log/antilog set up would have, so less effect.
-
RogerCook
-
- Posts: 495
- Joined: Thu Sep 17, 2009 9:56 am
- Full Real Name: Roger Cook
by rogera » Sat Mar 04, 2017 6:09 pm
The Dearmond 610 is a passive devise so there is a slight drop in volume but simply turning up your amp volume control to compensate gets around that.
The 500k and 250k pots in the 610 are linear.
-
rogera
-
- Posts: 1087
- Joined: Wed Sep 16, 2009 1:06 pm
- Location: South West
- Full Real Name: Roger Allcock
-
by RogerCook » Sat Mar 04, 2017 6:43 pm
Thanks Rogera. That will make things a easier. I'm also intending to install a switch so I can switch out the tone section when I don't need it (clumsy feet!) and to include some active circuitry to boost the volume level and to buffer the volume pot (when switched to volume only mode).
Roger
-
RogerCook
-
- Posts: 495
- Joined: Thu Sep 17, 2009 9:56 am
- Full Real Name: Roger Cook
Return to Gear
Who is online
Users browsing this forum: Google Adsense [Bot] and 57 guests