Page 1 of 2
VOX Tonelab LE Settings please

Posted:
30 Mar 2011, 17:14
by keithmantle
Hi Dave, Le on lts way from bonnie Scotland,any help with settings would be very welcome (and an extra cob at the Hankies !!)
Re: VOX Tonelab LE Settings please

Posted:
04 Apr 2011, 09:52
by dave robinson
Sent you a PM Keith.

Re: VOX Tonelab LE Settings please

Posted:
04 Apr 2011, 18:09
by René
Hi Dave.
Could you please send me a PM as well?
Thanks in advance.
All the best
René
Re: VOX Tonelab LE Settings please

Posted:
04 Apr 2011, 18:47
by dave robinson
René wrote:Hi Dave.
Could you please send me a PM as well?
Thanks in advance.
All the best
René
Sorry - too busy. I'll try and cut & paste them here later.
Re: VOX Tonelab LE Settings please

Posted:
04 Apr 2011, 18:53
by dave robinson
OK here we go;
These are echo only so that you can plug into your amp as you would the Quad or Magicstomp.
Disengage amps and pedals by pressing corresponding buttons until unlit. You don't need to colour the sound as your amp will do that.
FIRSTLY, FOR THE SAVAGE / WONDERFUL LAND / ATLANTIS / DANCE ON & ALL THOSE WITH SAME PATTERN.
On the third BLACK chicken-head knob marked MODULATION select MOD DELAY and press the button so that it flashes red.
On the first of the six silver knobs select SPEED 0.36 second one DEPTH 1.6 third one FEEDBACK 5.4
fourth one TIME 5.5 fifth one MODE 1 sixth one MIX 6.2
(The FEEDBACK and MIX are varied to achieve all of those patterns to give various levels according to those tunes above)
They are all the same speed and same head configuration but with various feedback and echo volume settings.
Now the next section.
On the fourth black chicken-head knob marked DELAY, select MULTI-HEAD and press until it flashed red.
Silvers knobs - 1. TIME =269 - 2. FEEDBACK =0 - 3. TONE=5.3 - 4.UNUSED - 5.MODE=5 - 6.MIX=4.3
Re: VOX Tonelab LE Settings please

Posted:
04 Apr 2011, 19:01
by dave robinson
Here's APACHE.
Again you need to turn off the lights on PEDAL and AMP and also MODULATION this time.
Select DELAY & MULTIHEAD and then add the following settings with the silver knobs.
1 - TIME =552 - 2. FEEDBACK = 0 - 3. TONE 8.7 4. UNUSED 5. MODE=3 6. MIX= 6.1
Now select REVERB.
1. TIME=4.3 - 2.LO DAMP= 6.9 - 3.HI DAMP=0 - 4.PRE-DELAY= 70 - 5.UNUSED 6.MIX=4.3
MAN OF MYSTERY / FBI
MODULATION on MOD DELAY
SILVER KNOBS- 1. SPEED=0.32 - 2.DEPTH=5.1 - 3. FEEDBACK=3.1 - 4. TIME=6.0 - 5.MODE=1 - 6.MIX=5.2
DELAY on MULTIHEAD
SILVER KNOBS 1.TIME=300 - 2.FEEDBACK=0 - 3. TONE=4.8 - 4.UNUSED - 5.MODE=2 - 6.MIX= 5.5
REVERB on ARENA
1.TIME=4.8 - 2.LOW DAMP=6.2 - 3.HI DAMP=0 - 4.PRE DELAY = 7.0 - 5.UNUSED - 6.MIX= 3.9
YOU CAN TWEAK THE REVERB MIX TO YOUR LIKING - GOOD LUCK.
Re: VOX Tonelab LE Settings please

Posted:
04 Apr 2011, 19:41
by René
Hi again, Dave.
Thank you so much..
Kindest regards
René
Re: VOX Tonelab LE Settings please

Posted:
04 Apr 2011, 19:47
by ecca
Dave, please send me a PM, I'm lonely.
Re: VOX Tonelab LE Settings please

Posted:
04 Apr 2011, 22:33
by Tone
Ecca
So Arthur, Fred, George, Bill, Brian and Pamela aren't speaking to you any more?
Tony
Re: VOX Tonelab LE Settings please

Posted:
05 Apr 2011, 08:53
by ecca
I have these problems getting my dress on..............