The ShadowMusic Web Community

Hi has anyone used a seperate rackmount feedback destroyer integrated into thier pa system
im looking for some advice as to where this would go in the chain
i am using a behringer xair18 digital mixer , into a active crossover, then into the power amps
i would pressume the feedback destroyer would be connected to the mixer outs then into the crossover
thanks
regards
jay

Jay,
Yes, after the mixer.

If you haven't bought one already, I've got a FBQ2496 that I was thinking of selling. Full working order, manuals, original box.

Ray

If you’re going to use one of these things here are some tips on how to get the best results:

Let it set 7 or 8 filters as a maximum.

If it sets any filter to narrower than 1/10 octave widen it.

If it sets any filter deeper than 6dB reduce the depth.

Lock all filters before any music goes through them.

Bob

Thanks for the comfirmation of placement
i already have the unit , i used it some time ago in a different set up
without crossovers so was unsure of the correct placement
thanks for the tips Bob
Regards
jay